• Maintain your skin healthy and smooth with the 'Joy Bubble' innovative and more convenient.
• Enjoy your carefree time in a tub filled up white 'hubble-bubble'. The 'Joy Bubble' will help you out to recover fatigue of your body and mind. The 'Joy Bubble' will help you to maintain your tender skin at your home simply. You had better protect your skin as scouring bubble bath with tender and delicate bubble. The 'Joy Bubble' is capable of producing about 75l (19.8 gal) in 15 minutes. Only rubbling skin with soft cotton gently is able to get rid of skin sebum, oldkertain and also maintain the balance of skin moisture.

• Please Prepare DC 1.5V C-Type and put-pole of battery into the battery case.

• Open the handle cap and pour body cleanser proper quantity (about 50ml) and then pour warm water until limit line of the water tank.

• Fill a tub up 1/2 with water.

• Fill a tub  with bubble from the 'Joy Bubble' about 10minutes.

• Enjoy your bubble bath.

٭ Connect the adaptor into adaptor jack of the main body.

• Voltage: DC6V Battery 1.5 VC
• C Type battery (4ea) or Adaptor (DC 5.0V)
• Water Quantity: about 2l (0.52 gal)
• Operation Time: 15 Minutes
• Weight: 2.0kg (4.4 lb)
• Material: ABS, PE, PVC, Silicon, etc.
• Size: W320 x L140 x H230 (mm)
• Size: W12.59 x L5.51 x H9.06 (in)

>> Tips for more effective bubble bath

Before bath, drinking water or milk helps to take out effete material from internal body.

Proper water temperature is recommended as 35ºC~40ºC (95ºF~104ºF) in summer and 38ºC~42ºC (100.4ºF~107.6ºF) in winter.

Proper time of bubble bath is 20 minutes for skin care.

After fill the water tank with cleanser and water, shake the water tank to mix up slightly.

After bubble bath, tapping lightly body to remove water and then apply body lotion.

>>How to install the 'Joy Bubble'

Pick the film up and soak it into water.

attach the film on proper place of wall.

After set a adsorption plate to a hole of circle as following mark ↑ (adsorption plate) and ■ (film), push the adsorption plate to make no air inside plate and then turn the lever down.

Attach the rest of 3 adsorption plates with same way.

After fit the main body hole in the reverse with the adsorption plate, push the main body from upper to down.