■ 제품의 특징

-조이버블(거품전용 발생기)

-집에서 거품 목욕 및 샤워 가능

-약 15분안에 욕조 가득채울 수 있는 거품량 발생 (거품의 양 분당 5ℓ 거품생성)

-생활방수 가능

-아답터 및 건전지 사용 가능

-아답터로 인한 전기 감전은 전혀 발생하지 않습니다.(DC아답터)

-흡착기를 이용한 부착 가능

* 제품의 A/S 및 서비스문의

■ 제품색상

본 체: 아이보리

물 통: 보라

제품특허 : RVP 기술 특허 제 036065호,
제 0367664호

기타 한국 특허 3건, 미국 특허 출원중

• Please Prepare DC 1.5V C-Type and put-pole of battery into the battery case.

• Open the handle cap and pour body cleanser proper quantity (about 50ml) and then pour warm water until limit line of the water tank.

• Fill a tub up 1/2 with water.

• Fill a tub  with bubble from the 'Joy Bubble' about 10minutes.

• Enjoy your bubble bath.

٭ Connect the adaptor into adaptor jack of the main body.

■ 제품사양

-제품명: 조이버블 (거품전용 발생기)

-전 원: DC 6V 건전지 1.5V ,C - TYPE 4EA 아답터 (DC 5.0V )

-물용량 : 2ℓ

-최대작동시간 : 약 15분

-중 량 : 2kg

-재 질 : ABS,PE,PVC, 실리콘 등

-크 기 : 320 X 140 X 230

>> Tips for more effective bubble bath

Before bath, drinking water or milk helps to take out effete material from internal body.

Proper water temperature is recommended as 35ºC~40ºC (95ºF~104ºF) in summer and 38ºC~42ºC (100.4ºF~107.6ºF) in winter.

Proper time of bubble bath is 20 minutes for skin care.

After fill the water tank with cleanser and water, shake the water tank to mix up slightly.

After bubble bath, tapping lightly body to remove water and then apply body lotion.

>>How to install the 'Joy Bubble'

Pick the film up and soak it into water.

attach the film on proper place of wall.

After set a adsorption plate to a hole of circle as following mark ↑ (adsorption plate) and ■ (film), push the adsorption plate to make no air inside plate and then turn the lever down.

Attach the rest of 3 adsorption plates with same way.

After fit the main body hole in the reverse with the adsorption plate, push the main body from upper to down.